3D Makers Point Demo Store

LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm
LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm
LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm
LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm

LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm

  • Vendor
    Sale price
    Regular price
    Unit price
    10% off and Free Shipping | Coupon Code: 3dmakeit10 | Ends:


    Estimated Arrival: Between Jun 01 and Jun 05. *ETA to USA Only

    Shipping & Returns: Free Shipping. All The Time.

    Why Buy From 3D Makers Point

    Produce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive heater block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour.

    Featuring a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK's tensile strength (15,200 psi - ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry. 

    Parts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).


    A large heater block, a massive melting zone, and a 1.2 mm nozzle brings the strongest, fastest prints yet.

    Check out all the features and additional printing capability info below.

    The ability to create functional jigs, fixtures, and prototypes on-site in a matter of hours significantly reduces lead time and cost. 

    Parts Included: 

    (1) LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm (Fully Assembled)

    (1) 3D Printed Wiper Mount

    (5) Replacement Wiper Pads

    (1) Red Scrub Pad

    Sample of PETg Filament, Used in First Print


    Layer Resolution: 0.6 mm - 1.0 mm (0.027 in - 0.039 in)

    Filament Diameter: 2.85 mm

    Nozzle Diameter: 1.2 mm

    Nozzle Material: Hardened Steel

    Extruder Hobb Material: Hardened Steel

    Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

    Extruder & Hot End: Genuine E3D Titan Aero

    Maximum Extrusion Rate: Approximately 205 grams/hour | 45.69 mm³/s with PLA at 220°C (428°F)

    Recommended filament diameter: 2.85 mm diameter (3 mm)

    Supported Materials: Carbon-fiber filled Nylon, ABS, PETg, PLA, NinjaFlex TPU

    Certified Open Source Hardware: US000148




    Works with: LulzBot Mini 2, LulzBot TAZ Workhorse, LulzBot TAZ Pro