Ultimaker 3 3D Printer

DEMO PRODUCT

The Ultimaker 3 is an innovative dual extrusion machine with a large build area. This industrial grade 3D printer is the first dual extrusion addition to the Ultimaker family of printers which includes the Ultimaker 2 + and Ultimaker 2 Extended + as well as the Ultimaker 3 Extended. The Ultimaker 3 allows you to create high resolution and production quality dual extrusion parts. The innovative nozzle lifting system, swappable print cores, and automatic bed leveling make this an exceptionally advanced dual extrusion printer ready for professional 3D printing.

DEPENDABLE DUAL EXTRUSION

Ultimaker's innovative dual extrusion system allows you to print with two materials at once so that you can utilize multiple colors or support materials such as HIPS. Dissolvable support materials like PVA allow you to create complex prints without using breakaway supports. The dual extruder on the Ultimaker 3 comes with a unique auto nozzle-lifting system which picks up your secondary print nozzle when it is not in use. This allows the user to achieve cleaner prints without the stringing commonly associated with dual extrusion printers. 

Powerful, but Quiet Cooling

The new fans on the Ultimaker 3 are ultra low noise to minimize distraction. The Ultimaker 3 comes with two new radial fans and fan shrouds which greatly improve airflow. The result is superior cooling, better quality bridging, faster printing, and seriously smooth printed parts.

MATERIAL OPTIONS ABOUND

The Ultimaker 3 is a fully open source 3D printer and as such, you can utilize any 3.00mm filament that you desire to use (although we recommend filaments with a diameter below 2.90mm such as our PRO Series which has a diameter of 2.88mm). Please note that some Ultimaker filaments will now be shipping with NFC chips which can be read by the Ultimaker 3 and Ultimaker 3 Extended. These NFC chipped spools allow materials settings to be auto populated for you. However, you may still continue to use any 2.85mm, 2.88mm, or 2.90mm filament that you desire to use with your new Ultimaker 3 or 3 Extended. 

PRINT CONTROL AND MONITORING

You can now print remotely over WiFi directly to your Ultimaker 3 via Cura or you can print using a USB stick. Feel free to check on your print at any time using the built in live camera on the Ultimaker 3.

NEW BUILD PLATE

The new build plate on the Ultimaker 3 is designed for active and automatic leveling. A capacative sensor in the print head measures the distance between the bed and the nozzle. The tilt angle is then compensated by adjusting the z height on the first few layers. This leads to better build plate adhesion and more accurate leveling. Additionally, the new build plate is also lighter and stiffer than previous build plates. Lastly, the build plate is heated so that you can print with a plethora of materials.

Ultimaker 3 Tech Specs

• Build volume of 215 x 215 x 200 mm
• Layer resolution up to 20 micron for 0.4 mm nozzle
• Print temperature up to 280 ˚C
• Dual extrusion with a soluble support material
• Swappable print cores
• Heated build plate with active leveling

WHAT'S IN THE BOX?

• Ultimaker 3 3D Printer
• USB stick, glue stick, grease, hex wrenches and USB and Ethernet cables
• Two swappable 0.4 AA print cores
• A swappable 0.4 BB print core
• A 350 g spool of Ultimaker PLA
• A 350 g spool of Ultimaker PVA
• A spool holder with an NFC cable
• A calibration card and XY calibration sheet